Care And Cleaning - Sunbeam MultiBlender PB7950 Instruction Booklet

Care and Cleaning

Quick cleaning method.
Half fill the blender with luke warm water
and a small amount of detergent. Press
the PULSE button for 10-20 seconds.
Then remove the jug and rinse it under
running water.
For thorough cleaning.
Turn the blender jug upside down. Unscrew
the six-blade assembly from the glass jug by
placing the open end of the ingredient cap
at the base of the blade assembly. Use the 5
grooves on the opening of the ingredient cap
to align the cap to the base of the glass jug.
Turn the ingredient cap in an anti-clockwise
direction to remove the blade assembly. See
Figure 3.
Figure 3
8
Remove the rubber seal from the blade
assembly. Wash the blender lid, ingredient
cup, rubber seal, blade assembly and blender
jug in warm soapy water.
Caution: Take care when cleaning the blades
as they are extremely sharp.
Note: Do not clean any part of the blender in
the dishwasher.
To clean the motor base.
Use a damp, soft sponge with mild detergent
and wipe over the motor base.
Note: Never immerse the motor base in water.