Connecting A Fortigate-5140 Pem To Data Center Dc Power - Fortinet FortiGate 5140-R Chassis Manual

Fortinet network device chassis guide
Table of Contents

Advertisement

Connecting a FortiGate-5140 chassis to data center DC power and data center ground

Connecting a FortiGate-5140 PEM to data center DC power

18
This section describes:
Connecting a FortiGate-5140 PEM to data center DC power
Connecting the FortiGate-5140 chassis to data center ground
The following procedure describes how to connect power to PEM A. You can repeat this
procedure to connect PEM B.
Figure 9: Connecting a FortiGate-5140 PEM to data center DC power
Data Center
-48VDC connector
-48V/-60 VDC
black to Data
Center -48VDC
Hot swap
LED
Alarm LED
OK LED
Hot swap
button
-48V/-60 VDC nom
terminal strip
connectors
Table 7: FortiGate-5140 PEM LEDs and controls
LED/Control
Description
HS (hot swap)
Normally off. Blinking blue indicates that the PEM is entering the hot swap
mode. Solid Blue indicates that the PEM is in hot swap mode and can be
LED
removed from the chassis.
Alarm LED
Normally off. Turns red when there is a problem with the power source, or if
one or more of the 8 PEM fuses are blown or missing.
OK (operate)
Green when the PEM is powered and operating normally.
LED
HS (hot
Press the HS button to enter hot swap mode. When the HS LED becomes
solid blue you can remove the PEM from the chassis.
swap) button
You need the following tools and equipment to connect a FortiGate-5140 PEM to data
center DC power:
A number 2 Phillips screwdriver.
An electrostatic discharge (ESD) preventive wrist or ankle strap with connection cord.
Four black AWG-14 stranded wires with terminal lugs attached and labelled -48V.
Four red AWG-14 stranded wires with terminal lugs attached and labelled RTN.
-48V
RTN
-48V/-60 VDC nom
RETURN
4
3
2
1
4
3
2
1
4
3
2
1
4
3
2
1
PEM
RTN (positive)
terminal strip
connectors
1, 2, 3, 4
1, 2, 3, 4
Data Center
RTN connector
RTN (positive)
red to Data
Center RTN
TERMINAL BLOCK COVER
Remove terminal block cover and
decable before removing PEM.
FortiGate-5140-R Chassis Guide
01-30000-87705-20090108
http://docs.fortinet.com/
Feedback

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fortigate-5140-r

Table of Contents

Save Article as PDF