Step 2: Connect To A Lan Port; Step 3: Insert The Card - Socket Low Power Ethernet Card User Manual

Low power ethernet card

Hide thumbs Also See for Low Power Ethernet Card:

Table of Contents

STEP 2: Connect to a LAN Port

Plug the connector into a port on your Local Area Network.

1. Insert the LP-E into a PC Card adapter right-side up, with the green

label on top.

2. Insert the combined unit into your notebook computer's PC Card slot.

Warning! Do not insert the card upside down or use

excessive force, or you may damage the card!

3. Your computer should report that it has found new hardware.

4. A message may appear reporting Digital Signature Not Found. Click Yes.

5. After several seconds, Windows XP should recognize the card and

report that it is ready to use.

CHAPTER 3: SETUP FOR WINDOWS XP

Table of Contents

Do you have a question about the Low Power Ethernet Card and is the answer not in the manual?

Lp-e