Socket Low Power Ethernet Card User Manual page 14

Pocket PC 2000/2002
1. Pocket PC 2000: Tap Start | Settings | Connections | Network.
Pocket PC 2002: Tap Start | Settings | Connections | Network Adapters.
2. In the Network Connections screen, select Socket LP-E Driver.
On a Pocket PC 2002, tap on the Properties button.
3. In the next screens, enter your network settings. If your LAN supports
DHCP, select Use server-assigned IP address.
If needed tap on the Name Servers tab to enter DNS and WINS
addresses.
4. When you have finished entering settings, tap ok.
IMPORTANT! If you forget to tap ok, your settings will not take effect!
5. An Adapters screen will appear. Tap ok.
6. Soft reset your Pocket PC by pressing the reset button.
CHAPTER 2: SETUP FOR WINDOWS MOBILE
If using a static IP address, you
may need to enter the host
computer's IP address in the
Primary WINS field to use
ActiveSync.
13