Socket Low Power Ethernet Card User Manual page 15

Handheld PC 2000/Handheld PC Pro/Pen Tablet
1. Go to Start | Settings | Control Panel | Network.
2. In the Network Configuration screen, select Socket LP-E Driver.if you
installed Socket's software. Otherwise select NE2000 Compatible
Ethernet Driver. Then tap Properties.
3. The IP Address screen will appear. Following your completed Network
Information Form, enter the appropriate settings for your network.
4. If needed, click on the Name Servers tab to enter any necessary DNS or
WINS addresses.
If using a static IP address, you may need to enter the host
computer's IP address in the Primary WINS field to use
ActiveSync.
5. When you have finished entering settings, tap OK.
IMPORTANT! If you forget to tap ok, your settings will not
take effect!
6. An adapters screen may appear. Tap OK. Soft reset your device by
pressing the reset button.
14