Ford AM/FM stereo Owner's Manual page 234

Maintenance and Specifications
1
Ensure the correct automatic transmission fluid is used. Transmission
fluid requirements are indicated on the dipstick or on the dipstick
handle. Check the container to verify the fluid being added is of the
correct type. Refer to your Scheduled Maintenance Guide to determine
the correct service interval.
Some transmission fluids may be labeled as dual usage, such as
MERCON and MERCON V. These dual usage fluids are not to be used
in an automatic transmission that requires use of the MERCON type
fluid. However, these dual usage fluids may be used in transmissions that
require the MERCON V type fluid.
MERCON and MERCON V type fluids are not interchangeable.
DO NOT mix MERCON and MERCON V. Use of a transmission
fluid that indicates dual usage (MERCON and MERCON V) in
an automatic transmission application requiring MERCON may
cause transmission damage. Use of any fluid other than the
recommended fluid may cause transmission damage.
2
Add 118 ml (4 oz.) of Additive Friction Modifier XL-3 or equivalent
meeting Ford specification EST-M2C118-A for complete refill of Visteon
Traction-Lok rear axles.
3
Add 237 ml (8 oz.) of Additive Friction Modifier C8AZ-19B546-A or
equivalent meeting Ford specification EST-M2C118-A for complete refill
of Dana Limited Slip rear axles.
ENGINE DATA
*
Engine
Cubic inches
Required fuel
Firing order
Ignition system Coil on plug
Compression
ratio
*Refer to the Power Stroke Direct Injection Turbo Diesel Owner's
Guide Supplement for diesel engine information.
234
4.6L V8
engine
281
87 octane
1-3-7-2-6-5-4-8
9.4:1
5.4L V8
engine
330
87 octane
1-3-7-2-6-5-4-8
Coil on plug
9.0:1
6.8L V10 engine
415
87 octane
1-6-5-10-2-7-3-8-4-9
Coil on plug
9.0:1