Power Wheels Ford F-150 K8285 Owner's Manual & Assembly Instructions page 13

18
• Position the wire clip so that the wavy side is out.
• Insert the straight side of the clip through the hole in the axle.
19
• Slide the clip so that the straight end goes through the other hole
in the axle.
• Make sure the straight end of the clip is through both holes in
the axle.
CORRECT
INCORRECT
INCORRECT
20
• If the clip is upside down or not through both holes in the axle, you
have not assembled it properly. Please remove the clip and go
back to step 18.
13
K8285a-0920