Advertisement
307-01-5
ASSEMBLY (Continued)
14.
CAUTION: The tabs on the output
shaft thrust washer (No. 11) point into the
case. Make sure the thrust washer is
correctly seated.
Install the output shaft thrust washer (No. 11).
• Coat the output shaft thrust washer with
petroleum jelly.
15. Install the park gear on the output shaft.
16. Install the output shaft and park gear.
Automatic Transaxle/Transmission
17. Install the low/reverse brake drum.
18.
19. NOTE: The reverse band actuating lever must
• Rotate the low/reverse brake drum clockwise
to install.
CAUTION: Make sure band is resting
on the 2 anchor pins in the case.
Install the low/reverse band over the reverse
drum.
fit into the notches in the band.
Install the reverse band actuating lever into the
reverse band.
2005 Mustang, 12/2004
307-01-5
Advertisement
