307-01-20
ASSEMBLY (Continued)
91. Tighten the center support screw.
• Tighten to 11 Nm (8 lb-ft).
92. Using the special tools, carry out the air
pressure test procedure. For additional
information, refer to Special Testing Procedures
in this section.
93. Install the special tools into the transmission
case.
Automatic Transaxle/Transmission
94. Using the special tools, install the main control
95. Remove the special tools, and loosely install the
valve body and loosely install the screws.
1 Install the short screw.
2 Install the screw with the larger head.
3 Install the remaining screws.
screw.
2005 Mustang, 12/2004
307-01-20