Advertisement
307-01-26
ASSEMBLY (Continued)
118. Remove the special tool and install the
remaining torque converter flex plate adapter
nuts.
• Tighten to 44 Nm (33 lb-ft).
119. Using one of the speed sensor holes, fill the
transmission with 8.5L (9 quarts) of automatic
transmission fluid.
Automatic Transaxle/Transmission
120. NOTE: Inspect O-ring seal for damage. Install
new if damaged. Lubricate the O-ring seals
with petroleum jelly to prevent damage to the
O-ring seals.
Install the sensors.
• Tighten to 10 Nm (89 lb-in).
2005 Mustang, 12/2004
307-01-26
Advertisement
