Advertisement
307-01-18
ASSEMBLY (Continued)
82.
CAUTION: The special tools must be
used to correctly align the pump with the
adapter plate to reduce gear noise, bushing
failure and leakage.
Using the special tool, align the fluid pump to
the adapter plate.
83. Install screws. Tighten the screws in a star
pattern.
• Tighten to 25 Nm (18 lb-ft).
84. Remove the special tools and install the 2
remaining screws.
• Tighten to 25 Nm (18 lb-ft).
Automatic Transaxle/Transmission
85.
CAUTION: Do not allow overdrive
band adjustment screw to back out. Band
strut could fall out of position.
CAUTION: Install, but do not tighten,
a new locknut on the band adjustment screw.
Apply petroleum jelly to the locknut seal.
Install a new locknut on the band adjustment
screw.
2005 Mustang, 12/2004
307-01-18
Advertisement
