Windows Vista - SIIG FireWire 800 CardBus Dual Quick Installation Manual

1. Insert the driver CD. Click Start, Run.
For 32-bit : Type D:\setup32.exe, click OK. (Change
D: to match your CD-ROM drive letter)
For 64-bit: Type D:\setup64.exe, click OK. (Change
D: to match your CD-ROM drive letter)
2. At the Welcome screen, click Next.
3. At the License Agreement screen, click Yes.
4. At the Destination Location screen, click Next.
5. Select Complete, then click Next.
6. At the Select Program Folder screen, click Next.
7. At the Security Alert box, click Yes. This step is for
32-bit operating system only.
8. At the Software Installation screen, click Continue
Anyway, then click Finish.
9. Select the restart Windows option, then click Finish.

Windows Vista™

Windows Vista operating system automatically installs
it's built-in FireWire 400 driver for the FireWire 800 CardBus
Dual. To get the full speed out of this controller, install
the FireWire 800 driver using the directions below.
1. Insert the driver CD. Click Start, in the Start Search
box.
For 32-bit:
(Change D: to match your CD-ROM drive letter)
For 64-bit:
(Change D: to match your CD-ROM drive letter)
2. Click Allow.
3. At the Welcome screen, click Next.
4. At the License Agreement screen, click Yes.
Type D:\setup32.exe, press Enter.
Type D:\setup64.exe, press Enter.
5