Windows Vista - SIIG 1 FireWire 800 CardBus DV-Ki Quick Installation Manual

.
1. Insert the driver CD. Click Start, Run.
32-bit : Type D:\setup32.exe, click OK. (Change D:
to match your CD-ROM drive letter)
64-bit: Type D:\setup64.exe, click OK. (Change D:
to match your CD-ROM drive letter)
2. At the Welcome screen, click Next.
3. At the License Agreement screen, click Yes.
4. At the Destination Location screen, click Next.
5. Select Complete, then click Next.
6. At the Select Program Folder screen, click Next.
7. At the Security Alert box, click Yes. This step is for
32-bit operating system only.
8. At the Software Installation screen, click Continue
Anyway, then click Finish.
9. Select the restart Windows option, then click Finish.

Windows Vista™

Windows Vista automatically installs it's built-in FireWire
400 driver for the FireWire 800 CardBus DV-Kit. To get the
full speed out of this controller, install the FireWire 800
driver using the directions below.
1. Insert the driver CD. Click Start, in the Start Search
box.
32-bit : Type D:\setup32.exe, press Enter. (Change
D: to match your CD-ROM drive letter)
64-bit: Type D:\setup64.exe, press Enter. (Change
D: to match your CD-ROM drive letter).
2. Click Allow.
3. At the Welcome screen, click Next.
4. At the License Agreement screen, click Yes.
5. At the Destination Location screen, click Next.
5