B136SPK1 ¼" Facia Front Enclosure Kit
6. Mount bottom panel brackets using five, 3/16"
phillips screws.
• If base panel is not 1/4" thick, use plastic shims
provided with kit to bring base panel depth up to
1/4".
7. Mount bottom cabinet extrusion using five, 1/4" flat
head phillips screws.
Bottom cabinet
extrusion
8. While facing back of refrigerator, remove 7 screws
from right edge of refrigerator cabinet.
November 1996
9. Slide panels into place on left and right side of
refrigerator. Verify that panel bracket is resting in
track on bottom cabinet extrusion. For smoother
installation, apply bar soap to cabinet extrusions
and panel brackets.
Bottom cabinet
extrusion
Side of
refrigerator
•
Also, front panel bracket must fit in gap in front
side extrusion.
Slide
panel in
here
Remove
screws
10. Line up holes in right side L-bracket with holes from
7 screws removed in step 4. Attach L-bracket to
back of refrigerator using 7 screws removed in
step 4.
63
1/4" Panel
3/4" Panel
(Optional)
Panel
bracket
L-Bracket
Bottom cabinet
extrusion
RS1200001