Viking PB-100 Technical Practice page 3

S o f t w a r e a
S o f t w a r e a
A. About the Software
The CD that is included with the PB-100 contains several different applications. The following is a brief description of the programs.
1. 1600A Series Polling Software
This software will automatically test the functionality of 1600A Series emergency telephones on a repeating schedule. It can
use up to (10) PB-100's at once to dial each phone and test it for ID codes and microphone/speaker function, keeping a time-
stamped log of all results. The software can also be used to automatically program units in the field.
2. AES-2000 Programming Software
The AES-2000 Accessible Entry System can be programmed remotely using the PB-100 and the AES-2000 Programming
Software. Both data and audio can be uploaded to the AES-2000 including names, phone numbers, audio queues and other
required programming variables. For more information, see DOD# 202.
3. Smart Terminal Diagnostic Software
Smart Terminal is diagnostic program that allows the user to send and receive data directly to a COM port of your PC. ASCII,
Hex and Decimal data can be entered, decoded and sent out the selected ports. Two separate display areas allow the user to
view data coming in on either port. This utility is useful for troubleshooting the connection between the PB-100 and your PC. If
an "H" followed by Enter is received by the PB-100, it will send back a "K" and a carriage return. Do this to assure you have the
correct com port configured for the PB-100.
4. K-2000-DVA Programming Software
The K-2000-DVA Multi-Input Voice Dialer can be programmed using the included software. All phone numbers and calling
parameters can be easily updated. The K-2000-DVA does not require the use of a PB-100, but rather connects directly to your
PC using the included serial cable or the USB to RS-232 converter cable. Audio recordings are not supported by the PC soft-
ware, see DOD# 303.
5. Entry Logger Software
Entry logger software provides transaction logging for the ES-1, K-1900-3 and C-4000 Entry Controller systems. Compatible
with any Windows based PC running Windows 98 or higher, the software adds time and date stamps to each transaction, and
allows user printing, record saving, and complete search capabilities. The Entry Logger software uses the Log Bus that is on
each of these products and a serial port on the PC. The logging software does not require a PB-100.
6. C-4000 Programming Software
View, modify and save programmed telephone numbers and programming parameters for the C-4000 Entry Controller using a
serial cable connection. Compatible with any Windows based PC running Windows 98 or higher. The C-4000 is programmed
without the use of the PB-100.
7. K-6000-DVA Programming Software
The K-6000-DVA Automated Voice Message Delivery System is programmed using the included software. The K-6000-DVA
does not use the PB-100 for programming, but rather connects directly to a PC using a spare serial port or to a USB port using
the included conversion cable. The software can handle up to 1000 names per unit and it can maintain a database for up to 8
units. Recordings on the K-6000-DVA can only be made through the phone line and not loaded directly from the PC.
8. SLP-4 Programming Software
The SLP-4 Single Line Paging Controller with CD quality audio comes with pre-recorded audio sounds but if a custom sound
is required, the included software can be used to load the wave file. The SLP-4 does not use the PB-100 for loading the wave
files, instead it connects directly to a PC using the USB port.
9. CTG-2 Programming Software
The CTG-2 Advanced Clock Controlled Tone / Message Generator is programmed using the included software. The CTG-2
does not use the PB-100 for programming, instead it connects directly to a PC using a USB port. The software creates and
maintains a database for the CTG-2 that includes up to 1000 events as well as the names and locations of any wave files used.
Audio wave files can be directly transferred from the PC to the CTG-2 using the CTG-2 Programming Software.
10. Wake Up Caller Software
This software allows a small hotel or motel to use the PB-100 to make scheduled wake up calls to any phone number. Set up
alarms to repeat on certain days, announce the time and play a message.
n d I n s t a l l a
n d I n s t a l l a
t i o n
t i o n
3