Connect The Base Unit - Uniden EXAI 8985 Owner's Manual

Place the power cord so it
does not create a trip
hazard, or where it could
become chafed and create
a fire or electrical hazard.

Connect the base unit

If you want to install the base unit on the wall, see page 9.
1
Connect the telephone line cord to the TEL LINE jack and to
a telephone outlet.
2
Connect the AC adapter to the DC IN 9V jack and to a
standard 120V AC wall outlet.
3
Set the base unit on a desk or
tabletop and place the handset
on the base unit.
Then raise the antenna to a
vertical position.
7