Table of Contents
Advertisement
4
Press the
or
select "Edit Memory",
then press
The following screen appears.
The cursor flashes indicating that the display is ready for the
name to be edited. When a name has not been stored, the
cursor appears at the beginning of the second line.
5
Press
,
the name. (See page 23.)
To edit only the phone number, skip this step.
6
Press
The following screen appears.
The cursor flashes indicating
that the display is ready for the number to be edited.
7
Use the number keypad,
the phone number.
The phone number cannot exceed 20 digits. (See page 23.)
When the phone number is not to be edited, skip this step.
8
Press
The handset beeps and displays
the confirmation screen. The
memory storage is complete.
For example, if you store a name and number into memory location
number 01, the display shows
After about 2 seconds,
"Memory Store" is
displayed.
9
Press
to return to standby mode.
key to
.
,
,
.
, or
.
"
Memory01 stored
, or
to edit
key to edit
"
.
29
Advertisement
Table of Contents
