Amano 3500 Series Handling Manual
  1. Manuals
  2. Brands
  3. Amano Manuals
  4. Clock
  5. 3500 Series
  6. Handling manual

Amano 3500 Series Handling Manual

Hide thumbs
1
2
3
4
5
6
7
8

Advertisement

Table of Contents

Enlarged version
3500/3600 SERIES
Handling Manual
IMPORTANT:
Please do not return this clock to the retailer. If you
have any questions or need assistance, please call us
toll-free at (800) 253-9836.
For more information about Amano's complete product line,
visit our web site at http://www.amano.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 3500 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Amano 3500 Series

Summary of Contents for Amano 3500 Series

  • Page 1 Handling Manual IMPORTANT: Please do not return this clock to the retailer. If you have any questions or need assistance, please call us toll-free at (800) 253-9836. For more information about Amano’s complete product line, visit our web site at http://www.amano.com...
  • Page 2 1. Installing your time clock 1.1 Remove the cover case from the time clock using the key as shown in Fig. 1. Turn the key all the way to the right and pull the cover forward. Lift the entire cover straight up and over the push bar.

  • Page 3: Setting The Time And Date

    2. Setting the time and date NOTE: Do not touch the clock hands. Insert a blank time card before you begin to verify the time, month and date. 2.1 SETTING THE TIME: Pull up and hold the red-tipped lever. Put your finger on the white wheel and push clockwise to the desired time as shown in Fig.
  • Page 4 2.2 SETTING THE MONTH: Press down the brass retainer clip inserted in the MONTH typewheel. This frees up the wheel. Turn the wheel counterclockwise using the tip of your pen or pencil (each groove represents one month) until the desired month shows on the punch as shown in Fig.

  • Page 5: Section 2.3 (Setting The Date)

    3. Adjusting your clock for Daylight Saving Time 3.1 Beginning of Daylight Saving Time: Advance the time one (1) hour using the method described in Section 2.1 (SET- TING THE TIME) on the first Sunday in April every year. 3.2 End of Daylight Saving Time: There are two ways to adjust your clock for the end of daylight saving time.
  • Page 6 4.3 Set the inked ribbon spools with ratchet gears into the holes of the frame diagonally. The inked ribbon must be carefully installed between the ribbon shield and frame as shown in Fig. 10. 4.4 Turn the ratchet gear to take up the slack in the inked ribbon. NOTE: New ribbons may be purchased from any dealer listed in the RECOMMENDED DEALER SERVICE NETWORK LIST that was enclosed in your time clock box.

  • Page 7: Specifications

    Specifications Power supply AC 120V, 60 Hz Power consumption 0.03A Ambient temperature -10˚ C ~ 50˚ C (14˚ F ~ 122˚ F) Humidity 10% ~ 90% (non-condensing) Clock movement Synchronous motor Printing Inked ribbon Imprints Month, Date, Hour & Minute or Day, Hour &...
  • Page 8 1996 Amano Cincinnati, Inc. Printed in U.S.A. ©...

This manual is also suitable for:

3600 series

Table of Contents