Preferences Dialog - File Transfer Tab - AMX NetLinx Studio Instruction Manual

Preferences dialog - File Transfer tab

Use the options on the File Transfer tab of the Preferences dialog to set default preferences for file transfer operations
(FIG. 292).
FIG. 292 Preferences dialog - File Transfer tab
File Transfer options
File Transfer Options
Automatically select reboot when sending a TKN file.
When sending a TKN, automatically send the associated SRC.
Automatically choose "Smart Transfer" when sending a TP4 file
By default, select "Send Bitmaps" when sending a TPD file
By default, select "Send Icons" when sending a TPD file
By default, select "Send Fonts" when sending a TPD file
By default, connect directly to a touch panel (no master) whenever transferring TPD files (only
available for Serial connections)
Show "Load List" Summary
By default, select "Send Glyph" when sending a KPB file
By default, select "Send Font" when sending a KPB file
NetLinx Studio - Instruction Manual
Setting Program Preferences
(default = enabled)
(default = enabled)
(default = disabled)
(default = enabled)
(default = enabled)
(default = enabled)
(default = disabled)
(default = enabled)
(default = disabled)
(default = disabled)
207