AMX NetLinx Studio Instruction Manual page 132

Netlinx design v3.3 or higher
Table of Contents

Advertisement

Communication Settings
FIG. 184
Communication Settings dialog - TCP/IP Settings
Communication Settings dialog - TCP/IP Options
List of Addresses:
Command Buttons
New:
Select:
Edit:
Listen:
Delete:
Delete All:
4.
Use the options in this dialog to configure TCP/IP communication settings with the target Master Controller. There
are two ways to do this:


120
This table lists all TCP/IP Addresses that have been configured and saved in NetLinx Studio. This
table presents the following information for each address in the list (as entered in the New TCP/IP
Setting dialog when each address is defined.
• TCP/IP:URL - This is the address information entered in the TCP/IP Address field.
• Description - This is the description entered in the Description field. Since this property is
optional, there may not be a description for every address in the list.
• Port - This is the Port assigned to each address (in most cases, 1319).
• Ping Host - This value indicates whether the address is configured to automatically ping the
Master Controller to ensure availability (True or False).
• User ID - This value indicates the User Name entered for this address.
• Password - This value indicates the Password entered for this address.
Since User and Password are optional (depending on whether authentication is required on the
target NetLinx Master), there may not be entries in these columns for every address in the list.
Click to define a new TCP/IP address, in the New TCP/IP Setting dialog. See the Editing a TCP/IP
Address section on page 127 for details.
With an address selected in the List of Addresses table, click to select that address for use, or to
edit or delete.
Click to edit the selected address, in the TCP/IP Properties dialog. See the Editing a TCP/IP
Address section on page 127 for details.
Click to listen for "blink" (UDP) messages from NetLinx Masters on the same subnet (in the Listen
For Masters dialog. See the Listening for Masters On the Network section on page 123 for details.
With an address selected in the List of Addresses table, click to remove it from the list. See the
Deleting a TCP/IP Address section on page 127 for details.
Click to clear the List of Addresses.
Manually entering the Master's IP address information (see page 122)
Listening for Master's on the Network (see page 123)
NetLinx Studio - Instruction Manual

Advertisement

Table of Contents
loading

Table of Contents