AMX NetLinx Studio Instruction Manual page 142

Communication Settings
FIG. 205 Communication Settings dialog - Virtual NetLinx Master communications options
Communication Settings dialog - Virtual NetLinx Master Options
Master System Number:
Current Connection:
Available Connections:
OK:
Cancel:
4.
In the Available Connections window, select the IP Address of the Virtual NetLinx Master.
5.
Click Select - note that this updates the Current Platform Transport Selected field with the IP address of the
selected virtual Master.
6.
Click OK to close the Communication Settings dialog and return to the Master Communication Settings dialog,
now indicating the selected Virtual NetLinx Master as the current connection (FIG. 206).
130
Enter the System Number for the Virtual NetLinx Master.
• Default = 1.
• Range = 1-65535
Assuming that the actual NetLinx Master is set to 0 (via the System Properties dialog -
System ID field), this default setting will work. However, if you have designated any other
number as the System ID, be sure to set this System Number to a different number than the
System ID, to avoid a conflict with the actual NetLinx Master.
Note: Changes made to the Master System Number field will not take effect until all
communications are stopped and restarted.
The current connection information (IP Address) is displayed here (read-only)
A listing of available Virtual NetLinx Master connections is provided in this table.
Click on a connection in this list and click Select to set that connection as the current Virtual
NetLinx Master connection.
Click to save your changes and close this dialog.
Click to discard your changes and close this dialog.
NetLinx Studio - Instruction Manual