Create An Empty Axs File - AMX NetLinx Studio Instruction Manual

Working with Workspace Files
FIG. 29 Master Source Code File Selection dialog
15.
Use the option buttons to select the type of Master Source Code file to create for this System:




16.
In the Wizard Completed dialog, click Finish to exit the Wizard.
The new Workspace (with your new Project containing the new System) is represented in the Workspace tab of the
Workspace Bar.

Create an Empty AXS File

This option generates an AXS file that is totally empty (no templates used).
1.
Click Next to proceed to the Master Source Code File Name dialog (FIG. 30).
FIG. 30 Master Source Code File Name dialog
2.
Enter a name (up to 128 characters) for the new (empty) Master Source Code File.
3.
Click Source Code File Description to enter a description (up to 2,000 characters) in the Source Code File
Description dialog, and click OK to return to the Master Source Code File Name dialog.
4.
Click Next to proceed to the New File Location dialog (FIG. 31).
16
Create an empty AXS File: This option generates an AXS file that is totally empty (no templates used). See
Create an Empty AXS File on page 16 for details.
Add an existing AXS File to the System: This option adds an existing AXS file to the System as the Master
Source Code File. See Add an Existing AXS File to the System on page 17 for details.
Create an AXS File Using Templates: This option generates an AXS file using either the NetLinx or Axcess
template, depending on the System type specified in Step 7. This option results in a Source Code file that is
formatted with header/footer information and all of the main sections of a typical Source Code File of the
selected type. See Create an AXS File Using Templates on page 17 for details.
Add the Master Source Code File later: This option allows you to exit the Workspace Wizard at this point,
and manually specify the System's Master Source Code File later.
NetLinx Studio - Instruction Manual