Table of Contents
Advertisement
Add/Edit Monitored Devices dialog
FIG. 15
Add/Edit Monitored Devices dialog
The Add/Edit Monitored Devices dialog is available to add and edit named devices. The fields you can edit are
as follows:
Add/Edit Monitored Devices dialog
Device:
Logical Name:
Manufacturer:
Model:
Support Module:
Using communications
(COMM) module?
Communications Module
Virtual Device
Communication Timeout: Place a check in the box to enable the function.
RMS CodeCrafter
Select a device from a drop-down list of devices extracted from the integrated
NetLinx file. You can select an existing device, enter a new device, or enter a
D:P:S address.
If you select an existing device or enter a new device, a warning for the device is
added to the generated code file.
Enter a name for the device in this text field.
Enter the manufacturer name for the device in this text field.
This is a text field where you can provide the model information for the device.
Click the radio button that best represents the device for the template:
• Projector
• Transport
• Basic
• Slide Projector
• None
When selected, CodeCrafter includes code for a communications module.
Select a Module Virtual Device from a drop-down list of devices extracted from
the integrated NetLinx file. You can select an existing device, enter a new device,
or enter a D:P:S address.
If you select None in Support Module, this field is disabled.
• Measured in 1/10ths of a second, where 0 is a valid value.
• Default is 300.
RMS CodeCrafter Project Pages
27
Advertisement
Table of Contents
