AMX RMS CodeCrafter Operation/Reference Manual page 27

Add/Edit Welcome Panel dialog
FIG. 11 Add/Edit Welcome Panel dialog
Use the options in the Add/Edit Welcome Panel dialog to add and edit panel information:
Add/Edit Welcome Panel dialog
Panel Size:
Description:
Base Device: Select a Base Device from a drop down list of devices extracted from the integrated NetLinx
RMS Pages:
OK:
Cancel:
RMS CodeCrafter
Select the panel size for the Welcome panel from a list of panel sizes supported by
CodeCrafter.
Enter a description of the Welcome panel in this text field.
file. You can select an existing device, enter a new device, or enter a D:P:S address.
If you select an existing device or enter a new device, a warning for the device is added to the
generated code file.
Drop down lists of devices available. This field is populated by devices extracted from the inte-
grated NetLinx file. You can select an existing device, enter a new device, or enter a D:P:S
address.
If you select an existing device or enter a new device, a warning for the device is added to the
generated code file.
Saves changes and closes this dialog.
Closes this dialog without saving changes.
RMS CodeCrafter Project Pages
23