American Dynamics Version 4.3 Software Update 3 Release Notes page 10

Intellex 4.30 Software Update 3 Release Notes
The following issues highlighted during the qualification of Bosch and VideoEdge cameras on
Intellex, but were found to be generic issues that existed on Intellex prior to Bosch and
VideoEdge camera support was added.
Description
7396 - VEIPCH2: Intellex 4.3 - Network
Client - Incomplete camera name displayed
in 'Retrieve Alarms' window in Network
Client.
7397 - VEIPCH2: Intellex 4.3 - Network
Client - Retrieve Alarms window - Camera
name will not change dynamically on NC if
camera name is updated and the cameras
reassigned in Live Display.
7295 - VEIPCH2: BOSCH: NWC-0495-
20P(NTSC) Motion detection is not sensitive
when all live display area selected
Suggested Work-Around
None
None
It is recommended that the user increases the
sensitivity levels on the settings for day / night
motion detection.
9
8200-2640-28 A1