Overview; Centrecom At-3624Ts And At-3624Trs Hubs - Allied Telesis CentreCOM AT-3624TS Installation Manual

Chapter 1

Overview

CentreCOM AT-3624TS and AT-3624TRS Hubs

This manual describes the hardware features and installation procedures
for Allied Telesyn International (ATI)'s set of "Slave" modules that are not
manageable as standalone devices. These devices include the AT-3624TS
and AT-3624TRS models. For information on the software installation and
network management aspects of AT-3600 Series hubs, see the separate
CentreCOM 3600 Series and AT-S4 Firmware Module Network Operations
Manual .
CentreCOM AT-3624TS and AT-3624TRS are multiple port hubs designed
to offer maximum flexibility for both workgroup and department needs.
These hubs can operate as non-managed hubs or are manageable in an
ATI department concentrator chassis.
This manual refers to two or more chassis-mounted hubs, at least one of
which is manageable, as a department concentrator. The term hub refers to
either a standalone hub (i.e., a single manageable repeater) or a
department concentrator configuration.
AT-3600 Series Slave hubs are based on an Application-Specific Integrated
Circuit (ASIC) ATI developed for maximum functionality and reliability.
Figure 1 shows a sample AT-3600 Series Slave hub, in this case an
AT-3624TS model.
Note
1