Configuration For Up To 16 Ap (With Redundancy); Figure 22: Configuration For Up To 16 Ap (With Redundancy) - Alcatel-Lucent OmniPCX Enterprise R7.1 Manual

Voice over WLAN Mobile IP Touch Design Guide R2.0

5.3. Configuration for up to 16 AP (with redundancy)

This configuration example depicts a model for up to 16 AP with WLAN controller redundancy.

Figure 22: Configuration for up to 16 AP (with redundancy)

In this scenario, the backup process takes place between the 2 WLAN Switches OA4308. In order to insure
a full backup, the total quantity of AP must not exceed the maximum number of AP supported by one
OmniAccess 4308.
Note: Depending on the global Bandwidth the Gigabit module can be used on both OA4308.
ESD/ Central Pre Sales / DF/ PH 42/45 January 2007 – Ed 01