Layer 3 Considerations (Svp And Mipt); Figure 15: Layer 3 Considerations - Alcatel-Lucent OmniPCX Enterprise R7.1 Manual

Voice over WLAN Mobile IP Touch Design Guide R2.0

3.2.2.9. Layer 3 considerations (SVP and MIPT)

Figure 15: Layer 3 considerations

Layer 3 configuration means that the SVP server and MIPT sets can be in different VLANs/IP subnets. In
this case WLAN switches and APs must be configured in layer 3.
This topology is fully adapted to routed data network environment
- Jitter must be less than 1ms between AP and SVP Server.
When cascading is needed (and Independently of layer 2 / 3 considerations), the Master SVP & the related
Slave SVP Server(s) must all be part of the same VLAN/IP subnet.
ESD/ Central Pre Sales / DF/ PH 29/45 January 2007 – Ed 01