Scan Function; Radio Station Memory Preset; Setting Memory Preset Stations - Ford 1998 Mustang Owner's Manual

In order to ensure proper operation of the AMS
feature, the tape MUST have a blank section of at
least 4 seconds duration between programs.

Scan function

The scan function
works in radio mode.
Press the SCAN button to activate the scan mode.
The radio scans up the frequency band, stopping
on each listenable station for approximately a
five-second sampling.
Press the SCAN button a second time to
deactivate the feature.

Radio station memory preset

The radio is equipped with five station memory
preset controls. These controls can be used to select
up to five preset AM stations and ten FM stations
(five in FM1 and five in FM2).

Setting memory preset stations

1. Select the frequency
band with the AM/FM
select control.
2. Select a station. Refer to Tune adjust or Seek
function for more information on selecting a station.
3. Press and hold a
memory preset control
until the sound returns,
indicating the station is
held in memory on the control you selected.
Repeat the steps for each station memory preset
button you want to set.
If the battery is disconnected, the memory preset
stations will need to be reset.
Controls and features
SCAN
AM/FM
1 2 3
4 5
23