Identifying Your Vehicle; Safety Compliance Label; Vehicle Identification Number; Engine Number - Ford 1998 Mustang Owner's Manual

Capacities and specifications

IDENTIFYING YOUR VEHICLE

Safety compliance label

The National Highway
Traffic Safety
Administration
Regulations require
that a Safety
Compliance
Certification Label be
affixed to a vehicle and
prescribe where the
Safety Compliance
Certification Label may
be located. The Safety Compliance Certification
Label is located on the front door latch pillar on the
driver's side.

Vehicle identification number

The vehicle
identification number
is attached to a metal
tag and is located on
the driver side
instrument panel.

Engine number

The engine number (the last eight numbers of the
vehicle identification number) is stamped on the
engine block, transmission, frame and transfer case
(if equipped).
184
MFD. BY FORD MOTOR CO. IN U.S.A.
DATE: XXXXX GVWR:XXXXX LB/ XXXXX KG
FGAWR: XXXXXX/XXXXXXX RGAWR: XXXXXXX/XXXXXXX
THIS VEHICLE CONFORMS TO ALL APPLICABLE FEDERAL
MOTOR VEHICLE SAFETY STANDARDS IN EFFECT ON THE
DATE OF MANUFACTURE SHOWN ABOVE.
VIN: XXXXXXXXXXXXXXXXX TYPE: XXXXXXXXXXXXXXX
MAXIMUM LOAD=OCCUPANTS + LUGGAGE=XXXKG/XXXXLB
OCCUPANTS: X TOTAL X FR X 2ND X RR OCCUPANTS LUGGAGE
TIRE: XXXX/XXXXX XXX
PRESSURE (FR) XXX kPa/33 PSI COLD
PRESSURE (RR) XXX kPa/33 PSI COLD
TRAILER TOWING - SEE OWNER GUIDE
EXT PNT: XXXXXX XXXXXX RC: XX DSO: XXXX F0000
BAR INT TR TP/PS R AXLE TR SPR
X XX XXX X XX
UTC
AIR BAG
XXXXXXXXXXXXXXXXX
XX XXXKG/XXXXLB
X XXXKG/XXXXLB
T0000
X XXXX
FOHT-15294A10-GA