Onkyo DV-BD507 Instruction Manual page 42

How to navigate through "HDMI Multi(LPCM)".
1
Use [K / L] to select your desired menu item then press [ENTER].
2
Use [K / L] to select your setting items.
• Press [RETURN] to go back to the previous screen.
3
Use [s / B] to select desired options. (Except for "Test Tone", "Default" and setting
options in "Speaker Size" setting.)
For setting options in "Speaker Size" setting:
Press [ENTER] to select desired options.
For "Test Tone":
Use [s / B] to select "Off", "Manual" or "Auto", then press [ENTER].
• The test tone will be output. If you select "Manual", use [K / L] to select desired speaker, then use [s / B] to adjust
the volume. If you select "Auto", use [s / B] to adjust the volume of the speaker that outputs the test tone.
• If you want to stop the test tone, press [RETURN].
For "Default":
Press [ENTER] to reset to the default.
4
Press [SETUP] to exit.
Menu
Speaker Size
Selects the desired
speaker to set. Then
change the setting
appropriately by
referring to the
descriptions.
Channel Level
Tests or sets the
volume for each
speaker.
42
FUNCTION SETUP
Setting items
Front Large*
Small
Center Large*
Small
Subwoofer On
Surround Large*
Small
Surround Back Large*
Small
Default
Test Tone: Off*
"Test Tone" is the test
Manual
tone which can be
Auto
output from the
speakers so that you
can adjust the volume
for each speaker.
Front Lch 0 dB to -12 dB
(0 dB*)
Center 0 dB to -12 dB
(0 dB*)
Subwoofer 0 dB to -12 dB
(0 dB*)
Front Rch 0 dB to -12 dB
(0 dB*)
Surround Rch 0 dB to -12 dB
(0 dB*)
Surround Back Rch 0 dB to -12 dB
(0 dB*)
Surround Back Lch 0 dB to -12 dB
(0 dB*)
Surround Lch 0 dB to -12 dB
(0 dB*)
Default
Options
Large:
For the large speakers with strong low
frequency reproduction capabilities.
Small:
For the small speakers which do not provide
strong bass sound.
You cannot change the setting of
"Subwoofer". If connected device is not
compatible with subwoofer, "Subwoofer" will
be displayed in gray.
Select "Default", then press [ENTER] to reset
"Speaker Size" setting to the default.
Select "Off" to deactivate "Test Tone".
Select "Manual", then press [ENTER] to
manually set the volume for the desired
speaker.
Select "Auto", then press [ENTER] to
automatically output the test tone from each
speaker.
If you have selected "Manual" in "Test Tone",
select the desired speaker to set and adjust
the volume for the selected speaker.
If you select "Auto" in "Test Tone", test tone
will automatically be output in order. Adjust
the volume of the speaker that outputs the
test tone.
Select "Default", then press [ENTER] to reset
"Channel Level" setting to the default.
Descriptions
EN