Speaker Setting - Onkyo DV-BD507 Instruction Manual

Hide thumbs Also See for DV-BD507:

Table of Contents

S Digital out setting

Digi

When "Audio Mute" is selected in "HDMI Audio Out" setting, HDMI audio signal will be muted and the audio signals

output from AUDIO OUTPUT (DIGITAL OPTICAL/COAXIAL) jacks change depending on "Digital Out" setting.

Quick A HDMI Audio Out A Audio Mute A Digital Out

Bitstream*:

When playing back discs recorded in Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS or DTS-HD, the

corresponding core stream (Dolby Digital or DTS) are output.

LPCM:

LPCM signal will be output from AUDIO OUTPUT (DIGITAL OPTICAL/COAXIAL) jacks.

• This setting is not effective when the HDMI audio signal is output.

S Speaker setting

This unit allows you to enjoy multi-channel surround sound such as 7.1-channel / 5.1-channel surround.

Surround back speaker (left)

To make the most of its feature, set up your speakers appropriately by referring to the following table.

Speaker setting options are available at the following locations;

(Available when you have HDMI cable connected to HDMI OUT jack)

Quick A HDMI Audio Out A HDMI Multi(LPCM)

Custom A Audio A HDMI Audio Out A HDMI Multi(LPCM)

FUNCTION SETUP

Front speaker (left)

Surround speaker (left)

e.g.) basic layout with 7.1-channel surround system

Centre speaker

Subwoofer

Surround speaker (right)

Surround back speaker (right)

Front speaker (right)

Table of Contents