Onkyo DV-BD507 Instruction Manual page 40

S
Audio
Audio
BD Audio Mode
HDMI Audio Out
Down Sampling
DRC
• For how to select the setting items and options, refer to "Custom" on page 36.
Setting items
BD Audio Mode
For BD, selects whether to output the
secondary and interactive audio with
primary audio if it is available or only
the primary audio. Refer to "Setting
the BD Audio Mode" on page 34.
HDMI Audio Out
Sets the audio format for the
audio output from HDMI OUT and
AUDIO OUTPUT (DIGITAL OPTICAL/
COAXIAL) jacks.
Down Sampling
Sets the digital audio output when
playing back BD or DVD recorded in
LPCM.
DRC
Sets whether to compress the range
of sound volume (dynamic range
control) when Dolby Digital, Dolby
Digital Plus or Dolby TrueHD audio is
played back.
*) Settings with (*) are the default.
• "Quick" menu consists of the setting menus frequently used, and they are accompanied with
• Under following circumstances, "HDMI Multi(Normal)", "HDMI Multi(LPCM)" and "HDMI 2ch" are not available.
- HDMI cable is not connected to HDMI OUT jack.
- Connected TV is off.
- Connected TV is not compatible with audio output.
40
FUNCTION SETUP
HD Audio Output
HDMI Multi(Normal)
On
Auto
HD Audio Output*:
Outputs only the primary audio. Set this mode in order to output Dolby Digital,
Dolby Digital Plus, Dolby TrueHD, DTS or DTS-HD audio of BD through HDMI
connection.
Mix Audio Output:
Outputs the secondary and interactive audio with primary audio if it is available.
HDMI Multi(Normal)*:
The multi-channel audio signals are output from HDMI OUT jack with bitstream
or LPCM.
HDMI Multi(LPCM):
The multi-channel audio signals are output from HDMI OUT jack with LPCM.
• Refer to pages 41-43 for setting options.
HDMI 2ch:
The audio signals are output from the HDMI OUT jack with a downmixed to
2ch LPCM.
Audio Mute:
Mutes the HDMI audio signal, and set the signal format from AUDIO OUTPUT
(DIGITAL OPTICAL/COAXIAL) jacks.
• Refer to "Digital out setting" on page 41 for setting options.
On*:
LPCM signals are converted to 48 kHz for output.
• Set to "On" when using digital connections to an AV amplifier that is not
compatible with sampling frequencies of 96 kHz.
Off:
For BD and DVD recorded in LPCM without copyright protection, 2-channel
audio signals up to 192 kHz are output as LPCM signals with no conversion.
Auto*:
When the discs recorded in Dolby TrueHD format are in playback, this unit
detects DRC setting of the disc and set "DRC" setting to "On" or "Off"
automatically.
Off
On
Options
.
EN