Monitor Settings [Monitor]; Settings For Indoor Monitoring [Room Monitor]; Night Illumination When Monitoring Door Stations [Video Door Led]; Setting The Duration Time Of Entrance Monitoring [Door Monitor Duration] - Aiphone JM-4MED Operation Manual

Monitor settings [MONITOR]

You can make the following settings for monitoring.
■ Settings for indoor monitoring
[ROOM MONITOR]
When set to "ENABLE", this station can be monitored by a sub
master station. When set to "DISABLE", this station cannot be
monitored by other stations.
1
From HOME window, touch
MONITOR .
2
Touch ROOM MONITOR and select "ENABLE" or
"DISABLE".
3
When the setting has fi nished, touch
■ Night illumination when monitoring door
stations [VIDEO DOOR LED]
When set to "ENABLE", the white light LED of door station
lights up automatically in low light conditions during monitoring.
The white LED turns off when monitoring ends.
1
From HOME window, touch
MONITOR .
2
Touch VIDEO DOOR LED and select "ENABLE" or
"DISABLE".
3
When the setting has fi nished, touch
■ Setting the duration time of entrance
monitoring [DOOR MONITOR DURATION]
You can set the entrance monitoring time.
This setting is also applied to all sub master stations in this
*
system.
Setting range:
30, 60, 120 seconds or CONTINUOUS (no time restriction)
1
From HOME window, touch
→
MONITOR DOOR MONITOR DURATION .
2
Touch DOOR MONITOR DURATION until the
desired monitoring time is displayed.
SETTINGS →
ENTER .
SETTINGS →
ENTER .
SETTINGS →
3
When the setting has fi nished, touch
CAUTION:
When set to "CONTINUOUS", the backlight LED of the screen
may degrade faster, potentially shortening the lifespan of this
station.
■ Setting the duration time of indoor monitoring
[ROOM MONITOR DURATION]
You can set the indoor monitoring time.
This setting is also applied to all sub master stations in this
*
system.
1
From HOME window, touch
MONITOR → ROOM MONITOR DURATION .
2
Touch ROOM MONITOR DURATION and select
"10 min." or "CONTINUOUS" (endless).
3
When the setting has fi nished, touch
Enabling/Disabling the operation sound
[GENERAL] - [SOUND SETTING] -
[AUDIBLE TOUCH TONE]
You can make this station sound a beep whenever the
touchscreen is touched.
1
From HOME window, touch
SOUND SETTING .
GENERAL →
2
Touch AUDIBLE TOUCH TONE and select
"ENABLE" or "DISABLE".
3
Touch ENTER to save change.
Enabling/Disabling voice guidance on a
door station
[GENERAL] - [SOUND SETTING] -
[VOICE GUIDANCE (JM-DVF-L ONLY)]
You can enable or disable voice guidance on JM-DVF-L, a
video door station (guidance-enabled type).
This setting is available for JM-DVF-L only. The other models
*
do not have a voice guidance function.
1
From HOME window, touch
GENERAL SOUND SETTING
→
VOICE GUIDANCE (JM-DVF-L ONLY) .
2
Touch DOOR1 - DOOR4 that corresponds to JM-
DVF-L, and select "ENABLE" or "DISABLE".
3
Touch ENTER to save change.
ENTER .
SETTINGS →
ENTER .
SETTINGS →
SETTINGS →
→
13