Note
5
Remote Interface Reference
This chapter describes 3488 mode commands applicable to the Agilent
3499A/B/C Switch/Control System. The chapter contents include:
•
Command Syntax, on page 101
•
3488 Mode Command Quick Reference, on page 102
•
3488 Mode Commands, on page 104
It is highly recommended that you use SCPI commands (in SCPI mode)
instead of 3488A commands (in 3488A mode). The SCPI commands allow
you to use all the features of the Agilent 3499A/B/C and the plug-in
modules. 3488 mode commands are a subset and are provided for legacy
installations.
100