Table of Contents
Advertisement
2
Chapter 2 Front-Panel Operation
To Pair Two Modules Together
To Pair Two Modules Together
You can pair two modules together so that they operate as a single unit.
The two modules to be paired must be identical (that is, they must have
the same model number) and be installed in the same mainframe. When
two modules are paired together, any operation on a channel of one
module will be duplicated on the corresponding channel of the other
module. The example below pairs modules installed in slots 2 and 5.
1. Press the Menu key. The CONFIG annunciator lights up and
"CARD PAIR" is displayed.
2. Press Enter.
When "FIRST SLOT x" is displayed, turn the knob to select the first
slot to be paired (i.e., Slot 2).
FIRST SLOT 2
3. Press Enter.
When "SECOND SLOT x" is displayed, turn the knob to select the
second slot to be paired (i.e., Slot 5) .
SECOND SLOT 5
4. Press Enter to return to the first level of the Menu menu.
CARD PAIR
5. Press Menu again to exit the Menu menu. The CONFIG annunciator
turns off.
40
Advertisement
Table of Contents
