Table of Contents
Advertisement
F
USER REPLACEMENT
The fuser is located inside the machine just behind the four image
drum units.
If the machine has recently been powered on, some
fuser components will be very hot. Handle the fuser with
extreme care, holding it only by its handle, which will
only be mildly warm to the touch. A warning label clearly
indicates the area. If in doubt, switch the machine off
and wait at least 10 minutes for the fuser to cool before
opening the machine cover.
Switch off the machine and allow the fuser to cool for about
10 minutes before opening the cover.
1.
Press the cover release and open the machine's top cover
fully.
WARNING!
Replacing consumable items> 84
Advertisement
Table of Contents
