Table of Contents
Advertisement
A
O
DVANCED
PERATION
If you are not satisfied with the scanned image, you can use the
advanced features to enhance your scanned image.
To use the advanced features, press Scan to Mode on the control
panel and then Additional Settings to prompt the Additional
settings screen. The settings will return to factory default values
if no operation is made for three minutes. For details on the
Additional Settings in Scan to Mode, refer to the following table:
MENU ITEM
Colour output format
B&W output format
Resolution
Density
Sub folder
Report to e-mail
NOTE:
>
If you make a mistake during the process, press STOP on the
control panel to cancel the operation.
>
After sending the scanned document to file server and if no more
action is required, logout from the ftp account. If there is no other
operation within 3 minutes, the system will log out automatically.
>
If the user retains the same profile to file documents, the login
name and password dialogue box will not be prompted. However,
if the user chooses the another profile, then the login process will
still be required.
C
OPYING
B
O
ASIC
PERATION
1.
Place your document(s) with text face UP in the ADF or
face DOWN on the glass.
DESCRIPTION
Choose the file format for the document to be scanned in
color from PDF, TIFF, JPEG, and MTIFF.
Choose the file format for the document to be scanned in
B&W from PDF, TIFF, and MTIFF.
Choose the scanning resolution for the scanned document
from a selection of 75, 100, 150, 200, 300, 400, 600 dpi.
A higher resolution reproduces your image with greater
details yet it requires more disk space.
If your original comes with a lighter or darker contrast,
choose the density level from 1 to 5 to optimise your
image.
Enter name of subfolder if necessary. (Check if you are
authorized to write under the destination server.)
Enter an e-mail address to send your filing report.
Operation> 52
Advertisement
Table of Contents
