Table of Contents
Advertisement
3.
Press the cover release and open the printer's top cover
fully.
4.
Identify the fuser handle (1) on the top of the fuser unit.
5.
Pull the two fuser retaining levers (a) towards the front of
the printer so that they are fully upright.
6.
Holding the fuser by its handle (1), lift the fuser straight
up and out of the printer. If the fuser is still warm, place it
on a flat surface which will not be damaged by heat.
a
Maintenance > 107
b
a
a
1
Advertisement
Table of Contents
