Switch The Headset On Or Off; Pair The Headset With A Compatible Phone; Disconnect The Headset From The Phone - Nokia HS-26W User Manual

Hide thumbs Also See for HS-26W:

Table of Contents

9242672_HS26W_1_en.fm Page 7 Tuesday, August 2, 2005 1:34 PM

When the battery is running out of power, the headset beeps, and the

red indicator light starts to flash.

■ Switch the headset on or off

To switch on, press the power key for 3 seconds. The headset beeps, and

the green indicator light starts to flash quickly. The flashing is slower

after the headset is connected to your phone.

To switch off, press and hold the power key for 2 seconds. The headset

beeps, and the red indicator light is displayed briefly.

1. Switch on your phone and the headset.

2. Activate the Bluetooth feature on the phone, and set the phone to

search for Bluetooth devices. See the user guide of your phone for

instructions.

3. Select the headset (Nokia HS-26W) from the list of found devices.

4. Enter the passcode 0000 to pair and connect the headset to your

phone. In some phones you may need to make the connection

separately after pairing. See the user guide of your phone for details.

You only need to pair the headset with your phone once.

5. If the pairing was successful, the headset beeps and appears in the

phone menu where you can view the currently paired Bluetooth

devices.

To disconnect the headset from your phone (for example, to connect the

phone to another Bluetooth device), do one of the following:

• Switch off the headset.

• Disconnect the headset in the Bluetooth menu of your phone.

• Move the headset more than 10 meters (30 feet) away from the

phone.

You do not need to delete the pairing with the headset to disconnect it.

G e t s t a r t e d

Table of Contents