Nokia Sport Headset (HS-29 and AD-45) 9250252/1...
ENGLISH DECLARATION OF CONFORMITY We, NOKIA CORPORATION declare under our sole responsibility that the products HS-29 and AD-45 are in conformity with the provisions of the following Council Directive: 1999/5/EC. A copy of the Declaration of Conformity can be found at http://www.nokia.com/phones/ declaration_of_conformity/.
Under no circumstances shall Nokia be responsible for any loss of data or income or any special, incidental, consequential or indirect damages howsoever caused.
ENGLISH The availability of particular products may vary by region. Please check with the Nokia dealer nearest to you. Export Controls This device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. Diversion contrary to law is prohibited.
ENGLISH • If the device or the Pop-Port connector has been exposed to sweat or salt water, wash it immediately with freshwater to avoid corrosion. The device must be carefully wiped dry. Get started Insert the plug of the HS-29 headphones (see part 1 on the title page) into the connector on the AD-45 control unit (10).
ENGLISH Call handling To make a call, use your phone in the normal way when the device is connected to your phone. During the call, speak into the microphone (9) of the device. If your phone supports voice dialing, press and hold the call key (5), and proceed as described in the user guide of your phone.
ENGLISH To play a track, select it in the music player of your phone, and press the play/pause key (6). See the user guide of your phone for details. To select the next track, press the fast forward key (7). To select the previous track, press the rewind key (8).
ENGLISH Care and maintenance Your device is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you protect your warranty coverage. • Keep all accessories and enhancements out of the reach of small children.
ENGLISH • Do not drop, knock, or shake the device. Rough handling can break internal circuit boards and fine mechanics. • Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device. • Do not paint the device. Paint can clog the moving parts and prevent proper operation.