Table of Contents
Advertisement
Chapter 4. Example Operations
Chapter 4
Example Operations
This chapter provides examples of how to configure
the system for a variety of operations.
VOICE AND DATA MIX
The following is an example of the use of a TSU 120 to
mix voice data from a PBX with data from a
customer's DTE, possibly a LAN bridge (see Figure 4-
1). This example assumes that B8ZS service is not
available end- to-end and therefore must use 56K
(672K rate) for the data and run AMI on the network.
In addition, the format on the network is ESF while
the PBX is D4.
The configuration charts shown here are filled in for
the example. The appendix, System Configuration
Charts, contains the same configuration charts with the
selections not filled in.
(ESF)
(ESF)
DS0 1-12
TSU 120
NETWORK
PBX
PBX
DS0 1-12
TSU 120
(D4)
(D4)
DS0 13-24
DS0 13-24
DTE
DTE
Figure 4-1
Example of Voice and Data Mix
9 1
61200.129L1-1
TSU 120 User Manual
Advertisement
Table of Contents
