When Not Using A Dhcp Server - Mitsubishi Electric XL1550U Network Manual

Preparation/SetUp (continued)

When not using a DHCP server

Select [Assign a specifi c IP address] and click Next.
5
6 Enter a fi xed IP address (for example, 192.168.0.1)
and click Next.
(Note)
Do not use 0 or 255 for the last digit of the IP
address.
7 Click Assign.
Click Finish.
8
9 Click the Search button.
Check the IP address you set.
•
(Note)
When using the error/alert e-mail notifi cation function
described later, click the Assign IP button and set the
subnet mask and default gateway correctly.
For the values of the subnet mask and default
•
gateway, contact your network administrator.
EN-7