Preparation/SetUp (continued)
Setting the IP address of the projector
Before setting the IP address, check that the projector has been LAN-networked and turn on the main power of the
projector.
Start the Projector-Control Device Installer.
1
• Select [Start] - [All Programs] - [Projector] -
[Projector-Control Device Installer] (in the case of
Windows
XP).
®
Click the Search button.
2
Projector is recognized.
•
(Note)
When projector isn't recognized, check the following.
•
The fi rewall function has been disabled. (When it
has been enabled, search may not be conducted.)
The personal computer and the projector are on
•
the same network. (For preventing unauthorized
access.)
More than one Projector-Control Device Installer
•
isn't running.
Select a projector by clicking the line showing the
3
projector and click the Assign IP button.
The Assign IP Address screen appears.
4
For automatic IP address setting by the DHCP server, go to page 6. For IP address setting without using the
•
DHCP server, go to page 7.
EN-5
Click here