Connecting The Water Inlet Hose To The Coffee Machine; Connection To The Water Inlet - Miele CVA 5060 Installation And Maintenance Manual

Plumbed water connection (CVA 5065)
Connecting the water inlet hose to the coffee
machine
^ Remove the cover cap from the bottom of the back panel of
the machine. Connect the angled end of the stainless steel
hose to the threaded connection of the machine. Use the
angled side of the stainless steel hose.
Ensure that all connections are water tight.

Connection to the water inlet

Before making plumbing connections, ensure the machine
is disconnected from the mains electricity supply.
Connection to the mains water supply should incorporate a
mains stopcock with 3/4" thread. The stopcock should be
fitted by a qualified plumber.
^ Connect the stainless steel hose to the stopcock.
Use the hose supplied with the machine. Old or used
hoses must not be connected to this coffee machine.
^ Ensure that it is screwed into position correctly.
31