Cleaning and care
Rinse milk pipework
14
To prevent milk going off in the machine and the pipework
getting clogged up, it should be rinsed through after use.
Rinsing is not a substitute for cleaning the pipework through
at the end of the day.
q
^ Use the right arrow sensor to highlight the maintenance
symbol and then touch the OK sensor.
^ Select "Rinse milk pipework" and touch the OK sensor.
^ Select "Start" and touch the OK sensor.
When prompted to, fill the large container with water,
^ fill it to the "max" marker with lukewarm water and then
press the OK sensor.
When prompted put the lid on it and then place it in the
machine.
^ Fit the lid from the stainless steel milk flask to the large
container and then turn it anti-clockwise until it engages
with the large container. Hang it in the machine where the
stainless steel milk flask normally sits.
^ Close the machine door and touch the OK sensor.
Follow the instructions in the display.
Maintenance
L n
H
I
J
r
C
m