Cleaning and care
Water container
18
^ Pull the rubber stoppers out, and manually clean the
stoppers and the jets thoroughly.
^ Replace the rubber stoppers.
^ After cleaning, push the jets firmly back into place on the
central spout, ensuring they are secure.
^ Replace the cover and then push the central spout back up
into position.
Empty the water container daily and - if you are not using the
plumbed in water supply - fill with fresh, cold tap water just
before use.
When cleaning, make sure that there is no soiling in the
area around the valve. Otherwise the container will not sit
correctly and this could result in water leaking from the
machine.