Miele CVA 5060 Installation And Maintenance Manual page 5

Built-in coffee machines installation, maintenance and problem solving guide
Table of Contents

Advertisement

^ If the bean container is not empty call the Miele Service
Department. If it is empty fill the container with fresh beans.
. . . the espresso is dispensed too quickly.
The coffee is too coarsely ground.
^ Set the grinder on a finer setting.
. . . the espresso is dispensed too slowly.
The coffee is too finely ground.
^ Set the grinder on a coarser setting.
. . . the espresso is not hot enough.
^ Have the cups and system been pre-warmed?
The smaller the cup, the more important it is to pre-warm it.
^ Check the temperatures the different types of coffee have
been set to.
^ Check whether the brew unit is blocked. Clean it if it is
blocked.
. . . coffee is not dispensed, even though the beans have
been ground and there is sufficient water in the water
container.
^ Check whether the slide control for the fineness of the
coffee is at the finest setting, or if the amount of coffee to
be ground has been set at the largest amount.
Because the process is time controlled, it is possible that the
process has taken so long that there is no time left for
brewing.
^ Select a slightly coarser coffee grind setting or a lower
setting for the amount of coffee to be ground.
. . . the machine door will not close.
^ Are the containers in position correctly?
^ It might be necessary to adjust the door hinges (see
"Installation: adjusting the door hinges").
Problem solving guide
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents