Cleaning And Care - Miele CS 1326 TepanYaki Operating And Installation Manual

Miele offer a range of branded cleaning
products. See "Optional accessories".
,
Do not use a steam cleaner to
clean this appliance.
The steam could reach the electrical
components and cause a short
circuit.
The appliance should be cleaned after
each use. Let it cool down to room
temperature.
To avoid water marks and limescale
deposits, use a soft cloth to dry
surfaces that have been cleaned with
water.
To avoid damaging the surface of
your appliance, do not use:
– cleaning agents containing soda,
alkalines, ammonia, acids or
chlorides,
– cleaning agents containing
descaling agents,
– stain or rust removers,
– abrasive cleaning agents, e.g.
powder cleaners and cream
cleaners,
– solvent-based cleaning agents,
– dishwasher cleaner,
– grill and oven cleaners,
– glass cleaning agents,
– hard, abrasive brushes or sponges,
e.g. pot scourers, brushes or
sponges which have been previously
used with abrasive cleaning agents,

Cleaning and care

– sharp pointed objects
(these can damage the seal between
the frame and the worktop).
Use a spatula to remove any large
particles immediately.
Allow the appliance to cool down until it
can be touched by hand, and then use
a solution of hot water and washing-up
liquid to soften the soiling. Remove the
soiling with a spatula and then wipe the
surface with a damp cloth.
Then clean the appliance thoroughly
with a few drops of ceramic and
stainless steel hob cleaner using a
clean, damp cloth. Follow the
instructions on the packaging.
Ensure that every trace of cleaner has
been removed from the surface by
wiping carefully with a damp cloth. Any
remaining traces could affect food the
next time you use the appliance.
Finally dry the appliance with a clean,
soft cloth.
Important - Conditioning agents for
stainless steel must not be used on
the Tepan plate.
15