Operation; Switching On And Off; Residual Heat Indicator - Miele CS 1326 TepanYaki Operating And Installation Manual

Operation

The Tepan plate is divided into two
separate cooking zones which can be
switched on and regulated
independently of one another. The
entire area can be used when cooking
large quantities of food. When cooking
smaller quantities, the front zone can
be used for cooking whilst the rear
zone can be used to keep food warm
using a lower power setting.
12

Switching on and off

To switch the Tepan plate on, turn the
control clockwise. To switch off, turn
the control anti-clockwise.
Only turn the control clockwise as
far as "12" and anti-clockwise back
to "0" again to switch it off. Do not
attempt to turn it all the way round
from the "12" position to "0" or vice
versa. This will damage the control.
After switching on, the in-operation
indicator and the temperature
N
indicator % light up. The temperature
indicator light will switch on and off
intermittently in conjunction with the
heating element.

Residual heat indicator

After switching off, the residual heat
indicator lights up.
The residual heat indicator remains on
until the Tepan plate is cool enough to
touch.
Do not touch or place any heat
sensitive objects on the Tepan plate
while the residual heat indicator is
still on.
Danger of burning.